SVTS GPRS-PRO
Smart Vehicle Tracking and
Fleet
Management System
- Simple to Install and Use
- Optional Emergency Button Support
- Periodic Position Reporting
- Smart Event Based Reporting
- Black Box Property
- Data Security
- Full-Duplex Voice Communication
SVTS GPRS-PRO Standard Package;
- SVTS GPRS-PRO Vehicle Unit
- GSM Antenna
- GPS Antenna
- Power Cable
Some optional accessories that can be used with SVTS GPRS-PRO and their properties;
Handset: An in-vehicle telephone unit that can be programmed to call one of three predefined numbers consecutively. The unit can receive calls from any telephone number however it can be restricted not to recieve calls from certain numbers.
Smart Handset: An in-vehicle telephone unit manufactured with the most recent technology. It has the features of a modern GSM telephone; it is a keypad equipped handset that enables issuing calls unlike the normal handset, and is full duplex hands-free voice communication capable.
Emergency Alarm Button: A hidden unit that the driver can press to inform the control center of emergency situations. More than one alarm button can be attached to SVTS GPRS-PRO.
Fuel Level Sensor: A unit for monitoring the fuel level and fuel level changes in the vehicle fuel tank.
Trailer Sensor: A sensor that enables us to monitor the truck connection to the trailer.
TeknoCom: A new generation voice and written communication unit manufactured with the most recent technology. Two way messaging capable, full duplex Hands-free voice communication feature available, alarm button, RF ID reader, barcode reader capabilities, Turkish and English keyboard modules are available.
Temperature Measurement and Control System: A temperature control system which alerts the control center if the temperature exceeds the upper and/or lower limits that are predefined by the user.
Door Sensor: A unit that monitors the state of the vehicle door and generates an alert when it opens or closes.
Driver Identification Sensor: An electronic unit that identifies the car driver and or its personnel online to the system.
Vehicle Stopping (anti-start) device: Which can be programmed to prevent the vehicle from restarting while the vehicle is stagnant.
Tachometer Sensor: A sensor that connects SVTS GPRS-PRO to the tachometer of the vehicle. Vehicles’ travelled distance and speed information will be taken from the vehicle’s tachometer.
Fuel Lid Sensor: Monitors the state of the fuel tank cover and is used to protect against stealing the fuel of the vehicles if the fuel tank cover is opened in an un authorized area an alert is generated.
SVTS GPRS-PRO Main Properties;
Smart Vehicle Tracking System with SVTS GPRS-PRO enables you to know:
- Vehicles exact locations.
- Vehicles starting and finishing work hours.
- Total distance travelled by the vehicles on a daily, weekly or monthly basis.
- Where and for how long the vehicles stopped?
Smart Event Based Reporting:
Events trigger automatic position reporting such as;
- Passing from a control point.
- Entering/Exiting to/ from a specified region.
- Exiting from a predetermined route.
- Exceeding a predefined speed limit.
- Pressing the alarm button.
Periodic Position Reporting: Send vehicles positions in pre-defined periods
- Remotely by using the SVTS software.
- Based on time or distance traveled.
Polling: User gets the latest speed and position data of the vehicles remotely by using the SVTS software via GPRS, SMS or data link.
Black Box Reporting: Record data locally and allow it to be read remotely (store and forward feature).
Data Security: Messages between the control center and the vehicle are encrypted to ensure secure
communication. The CRC-CCIT algorithm is used to ensure data integrity and 128 bit encoding is used to ensure data security.
Voice Communication: The unit supports and is fully equipped for voice features as well with optional handset.
Add-on features: Modular structure allows the addition of telematics, sensors and control equipment for various purposes from driver identification and fuel consumption to load monitoring, immobilization and others.
Technical Specifications:
| General | |
| Supply Voltage | 9V-28V DC |
| Stand-By Current | 20 mA/12V |
| Operating Current (GPRS active) | 110 mA/12V |
| Power Consumption | 1.44 W |
| GSM Antenna Connector | 50 ohm SMA Female |
| GPS Antenna Connector | 50 ohm SMA Female |
| Temperature Range | Operating : -20C to +55C |
| Storage: -40C to +85C | |
| Physical Properties | Dimensions:120 x 80 x 32.5 mm |
| Weight: 185 gr | |
| Internal GSM/GPRS Modem | |
| Standards | 73/23/EEC 89/33/EEC 99/5/EC EN 301 511 and 3GPP 51.010-1 EN 301 489-1 and EN 301 489-7 EN 60 950 FCC 47 Part 24 (GSM 1900) FCC47 Part 15 |
| Operating Frequency Bands | Quad Band: EGSM 850 / 900 / 1800 / 1900 MHz |
| Output Power | Class 4 (2W) @ 850 / 900 MHz Class 1 (1W) @ 1800 / 1900 MHZ |
| GPRS Connectability | GPRS multi-slot Class 10 GPRS mobile station Class B |
| SIM Card | Small size SIM, 3V |
| GPRS transfer rates | Upload: 8-12Kbps Download:: 32-48Kbps |
| Fax | Group 3:Class 1 |
| Integrated GPS Receiver | |
| Number Of Tracking Channels | 20 |
| Frequency | L1, 1575,42 MHz |
| Position Accuracy | <10m 2D RMS <5m, DGPS (EGNOS) |
| Maximum Speed | 515 m/sec |
| Maximum Acceleration | 4g |
| Sensitivity | Up to -158 dBm |
| Maximum Height | 18000 m |
| GPS Data Acquisition | Cold Start:Autonomous< 35 sec Warm Start:Autonomous < 35 sec Hot Start: Autonomous< 3 sec |
Input |
||
|---|---|---|
Number |
Name | Description |
| 1 | DI1 |
Digital Input 1 (5-30V DC) |
| 2 | DI2 |
Digital Input 2 (5-30V DC) |
| 3 | DI3 |
Digital Input 3 (5-30V DC) |
| 4 | DI4 |
Digital Input 4 (5-30V DC) |
| 5 | AI1 |
Analog Input 1 (0-3.3V) |
6 |
AI2 |
Analog Input 2 (0-3.3V) |
| 7 | Alarm |
Alarm Input |
| 8 | GND |
Ground |
Power Input |
||
|---|---|---|
Number |
Name | Description |
1 |
POWER INPUT | 9V-28V DC |
2 |
GND | Ground |
3 |
NC | Not connected |
4 |
IGN | Ignition Sense Input |
Voice Input (Handset) |
||
Number |
Name | Description |
|---|---|---|
1 |
MIC_P | Microphone Positive |
2 |
MIC_N | Microphone Negative |
3 |
SPK_P | Speaker Positive |
4 |
SPK_N | Speaker Negative |
5 |
ON/OFF_HOOK | On / Off Hook |
6 |
VCC | Supply Voltage |
7 |
BUZZER | Buzzer Output |
8 |
GND | Ground |
| Output | ||
Number |
Name | Description |
|---|---|---|
1 |
D01 | Digital Output 1 (3.3V-20mA) |
2 |
D02 | Digital Output 2 (3.3V-20mA) |
3 |
SW1_IN | External High Side Switch 1-IN (5-30V DC) |
4 |
SW1_OUT | External High Side Switch 1 – OUT (switched output) (2A) |
5 |
SW2_IN | External High Side Switch 2-IN (5-30V DC) |
6 |
SW2_OUT | External High Side Switch 1 – OUT (switched output) (2A) |
7 |
GND | Ground |
8 |
GND | Ground |
| COM1 Serial Communication Port | ||
Number |
Name | Description |
|---|---|---|
1 |
TX1 | RS-232 Transmit |
2 |
RX1 | RS-232 Receive |
3 |
CTS1 | RS-232 Clear-to-Send |
4 |
RTS1 | RS-232 Ready-to-Send |
5 |
N/C | Reserved for factory settings |
6 |
GND | Ground |
| COM2 Serial Communication Port | ||
Number |
Name | Description |
|---|---|---|
1 |
TX2 | RS-232 Transmit |
2 |
RX2 | RS-232 Receive |
3 |
CTS2 | RS-232 Clear-to-Send |
4 |
RTS2 | RS-232 Ready-to-Send |
5 |
VCC | DC Output (in the level of Input Voltage) |
6 |
GND | Ground |
COM3 Serial Communication Port |
||
|---|---|---|
Number |
Name | Description |
| 1 | TX3 | RS-232 Transmit |
| 2 | RX3 | RS-232 Receive |
| 3 | CTS3 | RS-232 Clear-to-Send |
| 4 | RTS3 | RS-232 Ready-to-Send |
| 5 | VCC | DC Output (in the level of Input Voltage) |
| 6 | GND | Ground |